Anti-Collision Strobe Light System
Home : Anti-Collision Strobe Light System

Photo of Aeroflash Signal Anti-Collision Strobe Light System Model No. 156-0007

For Mounting on Vertical Stabilizer

Aeroflash Models 156-0007 (for 12VDC) and 156-0002 (for 24-28VDC) feature a remote mounted power supply and a strobe lamp assembly.  Designed to replace the beacon light on Cessna, Grumman American and other aircraft originally equipped with this type anti-collision light mounted on the vertical stabilizer. Interconnections between the power supply and strobe light is made using a 15 foot cable included in the kit.

Model No. 156-0007 for 12VDC consists of:

One -152-0007 12 Volt, 1.8 amp draw Power Supply, wt. 1.33 lbs
One - 153-0001 Strobe Light Assembly (with 073-0141 Flashtube). Specify Red or Clear lens.
One - 073-0185 15 ft. Cable Assembly
One - 120-0039 Cockpit Decal (not shown)
One - 120-0030 Mylar Tape (not shown)
One - 130-0072 Instruction Sheet (not shown)
One - 130-0066B Installation Drawing (not shown)
One - 140-0027 FAA-PMA Eligibility Sheet (not shown)

Model No. 156-0002 for 24-28VDC consists of:

One -152-0010 28 Volt, 1.5 amp draw Power Supply, wt. 1.33 lbs
One - 153-0001 Strobe Light Assembly (with 073-0141 Flashtube). Specify Red or Clear Lens
One - 073-0185 15 ft. Cable Assembly
One - 120-0039 Cockpit Decal (not shown)
One - 120-0030 Mylar Tape (not shown)
One - 130-0072 Instruction Sheet (not shown)
One - 130-0066B Installation Drawing (not shown)
One - 140-0027 FAA-PMA Eligibility Sheet (not shown)

Spare Parts:

152-0007 Power Supply 12VDC
152-0010 Power Supply 28VDC
073-0185 15 ft. Cable Assembly
073-0141 Flashtube in silicon rubber base
111-0001 Lens - Red
111-0004 Lens - Clear
047-0001 AMP 3 Pin Connector
080-0001 Gasket
073-0002 Clamp Ring
101-0012 Base Plate
120-0039 Cockpit Decal
120-0030 Mylar Tape

For more information, use our Contact Us page. To order, call toll-free 1-800-322-2052 Ext. 300 (6:00 AM to 2:30 PM Central Time).